GoTo Page 1GoTo Page 2GoTo Page 3 Back home

Partial Viewing Of Auction Lots

  • Fuer Pin Gage set .250 to .500 Plus 0.0002" Minus 0.000 set complete

  • Vermont Pin gage Set Minus series B .061 to .250 Plus 0.0002 Minus 0.0000 set

  • Vintage Berger Transit

  • Carl Mahr Millimess Indicating Micrometer 1-2 inch Over/under indicating micrometer with 0.0001" resolution

  • Hilger Watts 142/12 Collomater Marked 142/12 155S and 142/12 689S Box needs regluing, but instrument is in nice shape

  • Taylor Hobson Precision Level Appears to be missing main Vial

  • Meyer Pin Gage Set .833 to .916 M-6 Minus

  • Meyer Pin Gage Set .626 to .750 M-4 Plus

  • Chatillon Digital Force Gage DFIS 200 Powers up and seems to work

  • Mitutoyo Height Master Bore Gage Setting Kit No. 515-121 Auxiliary Block Kit Series 515-for Bore Gage Used for zero-setting of dial bore gages and tubular inside micrometers(18-150mm)on a Height Master.

  • PAV 3-4 in. V-anvil Micrometer w/ Carbide Faces

  • Harig Wee Blocks tiny V Block set I believe these to be made by Harig Accurately holds small parts from 0.030" to 9/32" Hardened and ground to "tenths" accuracy

  • DoAll Gage Block Accessory Kit

  • Hardinge Special Plates for HV-4 5C Collet Indexer Set of 6 plates for Hardinge HV-4 style indexers. Expand the capability of your indexer by adding 3,4,18,22,24, and 36 division plates

  • Huge Lot of Van Keuren Thread Measuring Wires for Micrometer Rather than sort these into seperate lots, we included everything. Make your own set and sell the duplicates to fund your purchase.

  • End Mill Sharpening Fixture for Surface or Cutter Grinder Tosho Group endmill grinding fixture

  • Unitron inverted Microscope

  • Master Granite Angle Plate AA grade 6x9x3 Tru-Stone Master Angle Plate w/ case

  • Glass Angle Blocks Optical Inspection Not really sure what these are used for.

  • Dumore High speed Sensitive Drill Press Powers up and runs. Foot switch works as well. Light surface rust in spots.

  • Bridgeport No. 2 Boring Head for Milling Machine

  • Bridgeport No. 2 Boring Head for Milling Machine

  • Brown & Sharpe No 5851 Digital cadillac type Height Gage 0-455 mm x 0.01mm

  • Leitz Wetzlar / Opto-Metric tools Multi-purpose Microscope Base unit seems to be US made by Opto-Metric Tools The rest is marked Leitz Wetzlar

  • Unitron Profile Projector LP-6 Optical Comparitor

    • GoTo Page 1GoTo Page 2GoTo Page 3 Back home