| Partial Viewing Of Auction Lots
|
|
|
|
Mitutoyo No. 116-106 Panamike Micrometer
1 to 2 inch range by 0.001"
|
|
|
|
|
Brown and Sharpe / Tesa 210-4 Threadmaster Micrometer
Swiss made. 3 to 4 inch range.
With 5 anvil sets and one setting standard.
|
|
|
|
|
Brown and Sharpe / Tesa 210-1 Threadmaster Micrometer
Swiss made. 0 to 1 inch range.
With anvil sets and wrenches.
|
|
|
|
|
Starrett No. 55 Square 1.5 inch cute
Collector's note: The initials A.E.T. are lightly inscribed in this item.
|
|
|
|
|
Mitutoyo No. 117-107 Flange Micrometer 0 to 1 inch
|
|
|
|
|
Mitutoyo Uni-Mike / Pin-mike 117-107 Micrometer
0 to 1 inch by 0.0001"
|
|
|
|
|
T.C. 1 to 2 inch Indicating Micrometer Carbide Tips
0.0001" resolution indicating micrometer.
Works well, but does have a flat ground into it in one spot (see closeup photo)
|
|
|
|
|
Mitutoyo No. 147-353 Hub Micrometer
2 to 3 inch by 0.0001" with carbide faces. Excellent condition.
|
|
|
|
|
Brown and Sharpe Rubberflex collet set up for screw machines.
Includes 211 and 111 sleeves and spindle nut plus full collet set from .100 to 3/4".
Excellent condition. Should be adaptable to other machines w/ 21 B&S spindles.
|
|
|
|
|
PAV 1.2 to 2 inch V-anvil micrometer w/ carbide faces
Marked made in Liechtenstein (Swiss Economic Territory)
PAV is not a well known brand, but the quality is excellent.
It is very likely that the parent company is a major Swiss Mfg. like Tesa.
|
|
|
|
|
Tesa (Swiss made) V-Anvil micrometer 1.8 to 2.6 inch
Carbide faces.
|
|
|
|
|
PAV 1 to 2 inch Spline Micrometer
Made in Liechtenstein (Swiss Economic Territory)
PAV is not a well known brand, but the quality is excellent.
It is very likely that the parent company is a major Swiss Mfg. like Tesa.
|
|
|
|
|
PAV 3 to 4 inch Spline Micrometer New
New, still in sealed bag.
We have another unit for auction that is out of the bag, so look at that item description for better pictures as we did not want to remove the new unit from the bag.
Made in Liechtenstein (Swiss Economic Territory)
PAV is not a well known brand, but the quality is excellent.
It is very likely that the parent company is a major Swiss Mfg. like Tesa.
|
|
|
|
|
PAV 3 to 4 inch Spline Micrometer
Outside of wooden box has staining, but the micrometer itself is in excellent condition.
Made in Liechtenstein (Swiss Economic Territory)
PAV is not a well known brand, but the quality is excellent.
It is very likely that the parent company is a major Swiss Mfg. like Tesa.
|
|
|
|
|
NSK (Japan) 0 to 1 inch Deep Throat Micrometer
BG-051 0-1" X 0.001"
|
|
|
|
|
Starrett Uni-Mike Pin Micrometer 0 to 1 inch.
Unit does have a serial number engraved by a previous owner.
|
|
|
|
|
Mitutoyo 146-104 Groove Micrometer 0 to 1 inch
|
|
|
|
|
Mitutoyo 146-104 Groove Micrometer 0 to 1 inch
|
|
|
|
|
Starrett Uni-Mike Pin Micrometer
1-2" capacity.
past Owner markings engraved on unit
|
|
|
|
|
Brown and Sharpe 0 to 6 inch Depth Micrometer
|
|
|
|
|
Mitutoyo No. 141-133 Inside Micrometer Set
0 -12" Set
|
|
|
|
|
Mitutoyo 510-107R Indicating Micrometer Carbide faces
2-3" by 0.0001" like new condition.
|
|
|
|
|
Fowler B-Blocks (Ball-Blocks not V-Blocks)
Made in England by Rupert marketed by Fowler
Fowler No. 52-475-094
3-3/8" by 3-3/8" w/ clamps
|
|
|
|
|
Mitutoyo 3 to 4 inch Indicating Micrometer
No. 510-108R 0.0001" resolution
|
|
|
|
|
Carl Mahr Millimess Snap Gage
1-3/8 to 3" (35-75mm) by 0.00005" resolution.
|
|
|
|
|
Center Scope No. 2 MV for Milling Machine Jig Borer, Lathe, etc.
2 Morse taper Shank. Has edge finder fixture and prism.
|
|
|
|
|
Starrett Dial type Internal Groove Gage Model 1175
.375 to 6" by7 0.0005"
With extra anvil / contact set
|
|
|
|
|
Mitutoyo 167-913 Micrometer Standard Set 1 to 11 inch
Micrometer setting standards in plastic case.
Sizes from 1" to 11", which will cover a 0-12" Micrometer set.
|
|
|
|
|
Brown and Sharpe No. 255 Magnetic Block w/case
With on /off switch. magnetic holds strong when switched on.
|
|
|
|
|
Mitutoyo 172-143 Center Stage for Optical Comparitor or Microscope
|
|
|
|
|
SPI Angle Block set for Milling Surface Grinder or set up work
SPI / ABG No. 237 12 piece angle block set.
Consists of 2ea. 1/2 degree blocks (located in lid of case) and 1ea. of 1,2,3,4,5,10,15,20,25,30 degree blocks (located in main case.)
|
|
|
|
|
Brown and Sharpe / C.E. Johansson Sine Bar 10 inch
|
|
|
|
|
Pioneer Photo Tachometer Model 36 0 to 12K rpm
|
|
|
|
|
Gaertner Scientific Corp. Optical Comparitor Stage / fixture
|
|
|
|
|
Starrett Depth Micrometer 445 AZ-3RL
0-3" set in excellent mechanical condition.
Please note there are some ownership markings from a past owner (see photo)
|
|
|
|
|
Procunier Model 1E Tapping Head A
1E Tapping head with 2 Morse Taper shank. The upper end of the taper has been turned down to a straight shank so that the head can be held in a collet or tool holder as well as in a 2MT spindle.
|
|
|
|
|
Procunier Model 1E Tapping Head B
1E Tapping head with 2 Morse Taper shank and removeable 3 Morse Taper adapter
|
|
|
|
|
Procunier Model 3E Tapping Head
3E Tapping head with 2 Morse Taper shank.
|
|
|
|
|
Procunier Model 4E Tapping Head
4E Tapping head with 3 Morse Taper shank.
Missing the nut that tightens the collet down.
|
|
|
|
|
Procunier Model 3E Tapping Head
3E Tapping head with 4 Morse Taper shank.
Very Good condition
|
|
|
|
|
2 Small Geometric Die Heads w/ assorted dies.
Both heads have 5/8" Shanks.
1 each: 5/16" DS Geometric Brand Self Opening Die head
1 each: 3/16" Geometric Brand Die Head (non self-opening)
1 each box of assorted dies.
|
|
|
|
|
Geometric brand 1 inch DS Self opening Die head.
1-1/2" shank.
|
|
|
|
|
Efen (Germany) Self opening Die Head.
1-1/4 inch self opening die head with 1" shank. Interchangeable with geometric dies.
|
|
|
|
|
Vulcanaire R8 Jig Grinding Spindle for Bridgeport Mill.
Air powered Jig Grinding spindle with R-8 Shank for Bridgeport and other R8 milling machines.
|
|
|
|
|
Criterion 3 inch Boring Head w/ Cat CV 50 CNC Shank
DBL-203 3" Boring head w/CV 50 taper (removeable) shank.
|
|
|
|
|
Center Scope for Milling Machine Jig Borer, Lathe, etc.
1/2" Straight shank.
VG condition.
|
|
|
|
|
Brown and Sharpe No.124 Magnetic Parallel set w/bonus
4" Long B&S Magnetic Parallel set with case plus UNknown MFG 2.9" long set.
|
|
|
|
|
Taft Pierce Block for Grinding and Setup.
Second block is Shop made, but also very nice.
|
|
|
|
|
Starrett No. 224 Micrometer Set B 6 to 9 inch
6-9" interchangeable anvil micrometer set with standards.
|
|
|
|
|
Starrett No. 123 Master Vernier Calipers w/ case
12" Master Vernier Calipers w/ hardened and stabilized bar.
|
|
|
